 |
| Quantity: | |
|---|---|
AM-FFU11
Amber
AM-FFU11
Fan Filter Unitsare end purification equipment that combines fans and high-efficiency filters (HEPA) toprovide power, used in laminar flow Clean Rooms to meet the cleanliness level requirements of 100-100000.
The air is sucked in by the FFU Fan, filtered by the high-efficiency filter, and then sent out in a uniform laminar flow to continuously remove particulate pollutants.
Fan: High-efficiency brushless motor to provide stable airflow.
HEPA/ULPA filter: Usually equipped with H13-H14 grade HEPA or U15 grade or above ULPA filter, with filtration efficiency of 99.99% or more.
Cabinet: Made of stainless steel or galvanised steel plate, corrosion-resistant and well sealed.
Clean Room ceiling FFU system
Local operating stations (such as operating theatres, microelectronic assembly lines)
Modification or expansion of existing clean areas
Modular design, flexible installation
Low energy consumption and low noise
Intelligent control system can be used to adjust the airflow
This type of FFU Fan Filter Unitis the key equipment to maintain the stability of the cleanroom environment, which can ensure that the production or experimental process is free from particulate contamination. If you need to know more about the detailed parameters of FFU products or customised steps, you can consult us!
| Model | FFU-500 | FFU-1000 | FFU-1500 | FFU-2000 |
Outer size(mm) W*D*H | 575*575*230 | 575*1175*230 | 875*1175*230 | 1175*1175*230 |
| HEPA filter(mm) | 570*570*69 | 570*1170*69 | 870*1170*69 | 1170*1170*69 |
| Air flow | 500m³/h | 1000m³/h | 1500m³/h | 2000m³/h |
| Pressure | 210Pa | 210Pa | 220Pa | 230Pa |
| Motor power | 170W | 170W | 210W | 275W |
| Noise | 47-55dB | 47-55dB | 50-58dB | 50-58dB |
| Weight | 27KG | 34KG | 46KG | 55KG |
| Cleanliness | Class 100 (ISO 14644-1) | |||
| Material | Stainless steel/ Galvanized steel/ Coated steel | |||
| Voltage | AC 220V/50HZ (AC 380V/50HZ) | |||
Fan Filter Unitsare end purification equipment that combines fans and high-efficiency filters (HEPA) toprovide power, used in laminar flow Clean Rooms to meet the cleanliness level requirements of 100-100000.
The air is sucked in by the FFU Fan, filtered by the high-efficiency filter, and then sent out in a uniform laminar flow to continuously remove particulate pollutants.
Fan: High-efficiency brushless motor to provide stable airflow.
HEPA/ULPA filter: Usually equipped with H13-H14 grade HEPA or U15 grade or above ULPA filter, with filtration efficiency of 99.99% or more.
Cabinet: Made of stainless steel or galvanised steel plate, corrosion-resistant and well sealed.
Clean Room ceiling FFU system
Local operating stations (such as operating theatres, microelectronic assembly lines)
Modification or expansion of existing clean areas
Modular design, flexible installation
Low energy consumption and low noise
Intelligent control system can be used to adjust the airflow
This type of FFU Fan Filter Unitis the key equipment to maintain the stability of the cleanroom environment, which can ensure that the production or experimental process is free from particulate contamination. If you need to know more about the detailed parameters of FFU products or customised steps, you can consult us!
| Model | FFU-500 | FFU-1000 | FFU-1500 | FFU-2000 |
Outer size(mm) W*D*H | 575*575*230 | 575*1175*230 | 875*1175*230 | 1175*1175*230 |
| HEPA filter(mm) | 570*570*69 | 570*1170*69 | 870*1170*69 | 1170*1170*69 |
| Air flow | 500m³/h | 1000m³/h | 1500m³/h | 2000m³/h |
| Pressure | 210Pa | 210Pa | 220Pa | 230Pa |
| Motor power | 170W | 170W | 210W | 275W |
| Noise | 47-55dB | 47-55dB | 50-58dB | 50-58dB |
| Weight | 27KG | 34KG | 46KG | 55KG |
| Cleanliness | Class 100 (ISO 14644-1) | |||
| Material | Stainless steel/ Galvanized steel/ Coated steel | |||
| Voltage | AC 220V/50HZ (AC 380V/50HZ) | |||
